Skip to main content

Removing paint from concrete walls

Whether on walls or ceilings, on concrete, wood, or metal – removing old paint is always quite a hassle. However, with the right technique, everything goes a little easier.

There are a number of methods that can be used alone or in combination to get rid of old paint.

Below we will tell you about these methods.

Why you need wall cleaning

Removing old paint from concrete is almost always torture, hard and monotonous work. Why not just leave it as it is? What can happen to a new finish if the paint is hopelessly absorbed? Or should we suffer and sleep well, without worrying that the wallpaper will fall off? These questions may have asked anyone who has been to the crossroads of removing or preserving the paint layer on the concrete wall. Making a decision: to remove or not paint coating, depends on what kind of finishing work you’re going to do.

To know how to remove paint from a wall quickly and easily, you need to know its type and the type of surface on which it was applied. After all, different paints have different ways and methods of removing them from the wall. Some are easy and quick to remove, others you will have to struggle with. The adhesion (bonding) of the old paint with the new coating will be very poor, so there will be a risk that the new paint or plaster will eventually just peel off and fall off, so it is recommended to remove the old paint from the floor, wall or ceiling surface after all.

Each method of removing paint from the surface of walls, floors or ceilings has its own advantages and disadvantages. Choose the right method should be based on the type of paint (and the number of its layers) and the type of surface, as well as your financial capabilities to buy special tools and tools.

The main types of paints:

  • Water emulsion
  • Acrylic
  • Oil

The most difficult process is the removal of oil paint from the concrete surface. It is not always possible to visually determine what was once painted on the wall, so you may have to experiment with methods of removing paint from walls to find the best solution.

Tools for removing paint

Tools and materials that can be used to remove old paint from a floor, wall, or ceiling surface:

  • Putty knife, wide chisel, iron scraper;
  • Chemical paint remover;
  • Brush, roller;
  • Axe;
  • Heat Gun;
  • Water;
  • Personal respiratory and eye protection equipment during work (respirator, goggles).


  • Dual temperature setting.
  • Power: 1800W.
  • Overload Protection.

 4,8 Rating

Check Price

Ideal for varnish and paint removable, decorating, home improvement, upcycling, thawing frozen pipes, loosening rusted bolts, bending plastics, and much more. It has two heat and airflow settings (840℉and 1200℉) for more control depending on the application. Its built-in overheating protection design that makes your heat gun safer, and more reliable.

Wagner Spraytech PaintEater

  • 2,600 RPM.
  • Voltage 120 Volts.
  • Capacity 120 Amps.

 4,8 Rating

Check Price

Rotating palm sander is tough on paint but gentle on surfaces, making this the ideal power rotary paint removing tool. The Wagner Paint Eater has received the Member Tested and Recommended and the Contractor Tested and Recommended Seal from the Handyman Club of America.

Sunnyside Paint & Varnish Remover

  • Formulated with no methylene chloride or NMP.
  • Capable of removing up to 15 layers of paint, varnish, stain, lacquer, and urethane.
  • begins working in 30 minutes.

 4,8 Rating

Check Price

Multi-Strip ADVANCED is a unique, safe paint remover that is designed to remove up to 15 layers of paint and varnish. A lighter coat will remove 1 to 4 layers quickly while a heavier coat will remove multiple layers over time. It is biodegradable, non-flammable, low odor, and contains no Methylene Chloride, NMP, or Caustic.


Ways to remove paint from the surface

As we have said, the hardest thing to remove from the walls is oil paint.

The chemical method of paint removal

The chemical method or method of paint removal from the surface consists of the following actions: you should buy a special chemical solution for paint removal. Use such a tool should be careful and careful: it can cause burns and poisoning, and plus all at a price it is very expensive. The essence of the work with such a tool in general terms: the substance is applied with a brush or roller to the old paint layer, left to soak for a few minutes, and then the paint is simply scraped off mechanically with a spatula, metal scraper or brush with a metal pile. This method is relatively fast, but for before it is used, be sure to ensure good ventilation of the room, because the vapors of the paint remover are very harmful. By the way, paint in several layers will have to be removed with this tool in several stages.

  • Advantages: fast and easy.
  • Disadvantages: high toxicity of the product, a pungent specific smell, the need for special disposal, high price.

CAUTION! Precautions must be taken when working with chemicals: the room must be well ventilated, skin, eyes, respiratory organs must be protected, children and pregnant women must not be in the room.

Thermal method of paint removal

This method consists of the use of high temperature, as can be seen from the name of the method. It requires the obligatory presence of a heat gun, which should heat the painted surface until the paint softens, after which it can be removed from the floor, wall, doors with a spatula or scraper.

Be attentive and careful! This method is not allowed to work in places with electrical wiring and near decorative coatings.

The thermal method can only be used in well-ventilated rooms, you must wear personal protective equipment for skin, respiratory, and eyesight.

  • Advantages: relatively fast.
  • Disadvantages: difficult to work with, corrosive smell, toxic substances are released into the air when heated.

Sanding off old paint

Use an orbital sander or belt sander to get the old paint off the wall. That’s the good news. But there are also risks and side effects that doctors and pharmacists do not warn about.

First of all, it creates a lot of dust, which you’d better not inhale. Who knows what all is in the old paint. In addition, working with the high-speed sanders is quite exhausting and noisy. And also not completely harmless.

If you still want to get at the wall with a sander, there is one thing you should keep in mind: you will definitely destroy any existing structure. Perfect if you prefer a smooth surface anyway. Not so good if you want to remove the paint, but not the structure.

Advantages: relatively fast.
Disadvantages: complexity of work, caustic odor, toxic substances are

How to remove acrylic paint from walls

Acrylic paint on floors, ceilings, and walls can be removed with an ordinary metal brush. You can also use coarse sandpaper (sandpaper). Protect your hands before working: wear protective construction gloves. Good paint will be difficult to remove, so it is quite effective to use the previously described methods. By the way, acrylic paint adheres perfectly to an old layer of acrylic paint if it is still in excellent condition.

IMPORTANT: When using any paint stripping method, you must wear eye, hand, and respiratory protection (respirators, goggles, protective construction uniforms, etc.), and you must consult with an expert before using a particular tool, method, or technique.

Leave a Reply