In this article, you will find a review of right angle drill adapter. The most distinguishing features of different right angle drill adapters are represented in this review to help you to make a good choice.

Right Angle Drill Adapter – Best Choice

 4,9 Rating

Milwaukee Right Angle Drill Attachment Kit

  • Easy to use
  • Durable all metal housing and steel gears
  • Accepts standard 1/4 in. hex shank bits
Check Best Price

When you buy through links on our site, we may earn an affiliate commission. Thanks for helping us do what we love.

Right Angle Attachment

Milwaukee’s Right Angle Attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4″ hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in-lbs of torque. The compact design measures only 2 inches wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4″ hex drive accessories.

Right Angle Drill Adapter - Review

how to choose right angle attachment for drill

Right Angle Drill Attachment - TOP 7

  1. DEWALT Right Angle Attachment
  2. DEWALT Right Angle Attachment, Flex Shaft, 12-Inch
  3. RYOBI Right Angle Drill Attachment
  4. Milwaukee Shockwave Right Angle Adapter
  5. Milwaukee Right Angle Drive Unit Attachment for Milwaukee Drills
  6. KKmoon 0.8-10 mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter
  7. Milescraft 1304 Drill90PLUS – Right Angle Drill Attachment

Dewalt Right Angle Drill Adapter - Top Choice

DEWALT Right Angle Attachment, Flex Shaft, 12-Inch

Review of DEWALT Right Angle Attachment

Flexible shaft reaches nearly any space.

True 90 degree right angle head for versatility.

 4,8 Rating

Check Price

DEWALT DWARAFS 12″ Right Angle Flex Shaft

12″ Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid Load head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support. 90 degree head and flexible shaft reaches tight spaces. 10X magnetic holding power on average vs. DW2505 using #8 truss-head screw. Rapid Load head for easy bit changes

DEWALT Right Angle Attachment

DEWALT Right Angle Attachment Review

Magnetism for Fastener retention.
Engineered for use in impact drivers, allowing users to drill or drive.

 4,7 Rating

Check Price

DEWALT IMPACT READY Right Angle Drill Attachment

Best-in-Class Performance and Accessibility, with 1.5-in front-to-back design. Magnetism for fastener retention. Engineered for use in impact drivers, allowing users to drill or drive. DEWALT Right Angle Attachment is engineered with a magnetism for fastener retention. Made to be used in impact drivers, this tool by DEWALT allows you to driver or drill without any hassle.

RYOBI Right Angle Drill Adapter - Top Choice

RYOBI Right Angle Drill Attachment

RYOBI Right Angle Drill Attachment review

90-degree design For drilling and driving in tight spaces 3/8 in. shank fits all drill/ drivers 1/2 in. and larger
Weight: 1.32 pounds

 4,7 Rating

Check Price

The RYOBI Right Angle Drill Attachment

Converts your standard drill into a 90-degree tool, making it easy to drill and drive in tight spaces. The convenient keyless chuck makes changing bits quick and easy, and eliminates the need to keep track of a chuck key. Ergonomic grip makes this tool comfortable to use. The Right Angle Drill Attachment fits in all drills with 3/8 in. chucks and larger.

Milwaukee Right Angle Drill Adapter - Top Choice

Milwaukee Shockwave Right Angle Adapter

Milwaukee Shockwave Right Angle Adapter review

Optimized Internal Shockzone absorbs peak torque and prevents breaking.
1.4″ Slim Profile for tight access

 4,7 Rating

Check Price

Shockwave Right Angle Adapter

Right Angle Adapter features an Internal Optimized Shockzone which absorbs peak torque and prevents breaking. The shanks are made from Custom Alloy76 Steel which is engineered for extended life. The hardened gears provide increased torque transfer for added durability. With only a 1.4″ Slim Profile, the adapter allows access into the tightest of spaces. Adapter is designed for use in both Impact Drivers and Drill Drivers and works with all 1/4″ Hex Shank accessories.

Milwaukee Right Angle Drive Unit Attachment for Milwaukee Drills

Milwaukee 48-06-2871 Right Angle Drive Unit Attachment for Milwaukee Drills review

Provides 2 Additional Drilling Speeds.
For use with Milwaukee 1/2″ D-Handle Drills.

 4,7 Rating

Check Price

Right Angle Drive Unit

Allows 5-1/2″ for right angle drill head and chuck. Provides two additional drilling speeds. Chuck transferred from drill to low spindle of right angle unit reduces drills normal speed by 1/3 and increases drilling torque by 50%. Chuck transferred to opposite spindle of right angle unit increases speed by 50%.

KKmoon Right Angle Drill Adapter - Top Choice

KKmoon Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter

KKmoon Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter review

Simple to install and operate, with a handle for stable usage.
Make electric drill power swerve 90°for hard-reached places.

 4,7 Rating

Check Price

90 Degree Professional Cordless Drill Attachment Adapter

This is a high quality 0.8-10 mm right angle drill attachment with max.3/8″ chuck and 8 mm hex shank, which makes it suitable for almost all standard drills. It can make drill power swerve 90°and get to hard-reached places. 10mm keyless chuck, accept 0.8-10mm drill bits, with manual tightening / loosening. 8mm hex shank suits most standard drills: hand/power drills, electric drill, buffing attachments etc. Max.1500RPM and 20N·m torque.

Milescraft Right Angle Drill Attachment - Top Choice

Milescraft 1304 Drill90PLUS - Right Angle Drill Attachment

Milescraft 1304 Drill90PLUS - Right Angle Drill Attachment

Designed with a minimum reach of only 4”.
Compatible with most drill accessories up to 3/8″.

 4,7 Rating

Check Price

Right Angle Drill Attachment With Keyless Chuck

Right angle drilling attachment is perfect for drilling those hard to reach wall studs and floor joists, as well as a host of other applications. Ideal for plumbers, electricians, HVAC installers and homeowners needing to navigate tight spaces. With a minimum reach of 4″, it is compact and lightweight for those difficult spots. For use with most drills – corded or cordless.

All our reviews are based only on expert judgment or practical experience with most of the Tools, Parts, and Accessories. We strive to ensure that our leadership is independent and as detailed as possible.

How to choose right angle attachment for drill and screwdriver?

Types of angle adapter for drill


The angle adapter for the screwdriver is divided into two types: flexible and rigid.

Features of a flexible adapter:

  • the ability to penetrate into the most difficult places;
  • twisting out tightly seated self-tapping screws;
  • wide use in everyday life;
  • not suitable for twisting metal self-tapping screws.

The Rigid Adapter differs from the Flexible Adapter in the following features:

  • sturdy chuck;
  • suitable for professional use;
  • torque: 40-50 nm.

The structure of these types varies greatly. Flexible adapter has a metal case, a magnet bit grip, flexible shaft. Rigid adapter is made of steel, two types of gripper, magnetic and cam, there is a bearing.

How to choose an adapter?

Battery powered screwdrivers are the most common device in construction. Its main “plus” is mobility. Depending on the model of the screwdriver, the battery is supplied with voltage from 14 to 21 volts. At the “output” is obtained from 12 to 18 volts.

When selecting the angle adapter for the 18 volt end cap screwdriver, please note the following recommendations:

  • nozzles (steel P6 and P12) are suitable for use with metal screws;
  • available models usually use a tribes made of modern plastic;
  • the adapter is light, but the torque is limited to 10 nm;
  • the steel gearbox is capable of increasing the torque to 50 nm;
  • the larger the size of the bit extension, the higher the performance of the screwdriver;
  • the “reverse” option expands the functionality of the device (not only screw, but also unscrew the screws).
Max Wedler

Max Wedler

Hi! I'm Max Welder (svop.org). I always wanted to work with my own hands, repair something, do things. Now I combine my knowledge with computers and my own knowledge in the field of mechanics in order to understand which tools I like the most. I hope to convey some knowledge and experience.

Leave a Reply

+1 646-845-7301
svop.org@gmail.com
100 Church St, New York,
NY 10007, United States